BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
      03-10-2017, 07:10 AM   #1
dawg1
New Member
7
Rep
26
Posts

Drives: 640ix
Join Date: Feb 2016
Location: GA

iTrader: (0)

New wheel offset, size help

On a 640/650 F13 (2014), would these size wheels fit well enough to use and look good?

Front:
9" wheel with 11mm less inside (compared to stock) - 15mm more outside

Rear:
10" wheel with 3mm less inside - 23mm more outside

I suppose the front 'could' rub at extreme turns -is that right? Is the extension on the outside going to look ok?

Thanks for any input.
Appreciate 0
      03-10-2017, 12:16 PM   #2
ndinh
Lieutenant
United_States
161
Rep
554
Posts

Drives: 640i GC, X5
Join Date: Jul 2015
Location: Los Angeles

iTrader: (2)

Looks like your offsets are very aggressive (low) for both front and rear. The fronts will be ok because alot of guys run a 10mm spacer with their stock wheels anyways so it'll stick out another 5mm or so, not extremely bad. The rears will be very aggressive and may look strange. If your car isn't lowered then you won't have rubbing issues. What are the ET numbers? Recommended ET's for 20x9 are between 30-36 +/- and 20x10.5 are 36-42 +/-.
Appreciate 0
      03-10-2017, 12:34 PM   #3
dawg1
New Member
7
Rep
26
Posts

Drives: 640ix
Join Date: Feb 2016
Location: GA

iTrader: (0)

Thanks for the reply. The wheel size I was considering for the rear has these specs:

10X20 ET:34

I think that's the spec for the M5 343 rear wheel in which I found a number of threads saying people use that wheel on their 640/650 F13. I may be mistaken but I guess the rear 'should' look ok if I go by the other threads (??). Please correct me if I've made an error somehow though. Thanks.
Appreciate 0
      03-10-2017, 12:48 PM   #4
ndinh
Lieutenant
United_States
161
Rep
554
Posts

Drives: 640i GC, X5
Join Date: Jul 2015
Location: Los Angeles

iTrader: (2)

That offset should be fine. I'm running 20x10.5 ET42 in the rear and after plugging your 20x10 ET34 into willtheyfit, yours will stick out 1.7mm further than mine which will be fine. My rears are perfect, even slightly aggressive when looking at the car from the rear so yours will be a tiny bit more aggressive.
Appreciate 0
      03-11-2017, 09:50 PM   #5
M6-Coupe
Major General
M6-Coupe's Avatar
1125
Rep
6,064
Posts

Drives: F92 M8
Join Date: Feb 2014
Location: Bay area

iTrader: (0)

There are many people running on 343M (M5) and are fine.
343M (M5) front : 9x20 ET 32 ; rear : 10x20 ET 34
Compare to 373 front : 8.5x20 ET 33 ; rear : 9x20 ET 44
__________________
Current : 2020 F92 Black Sapphire M8 - ZF8
Gone : 2018 F80 Mineral Gray M3 - 6MT
Gone : 2016 F82 Austin Yellow M4 - 6MT
Gone : 2013 F13 Sakhir Orange M6 -7DCT
Gone: 2013 F13 Alpine White 650i -ZF8
Appreciate 0
      03-23-2017, 01:52 PM   #6
drmlee
Private First Class
45
Rep
144
Posts

Drives: F06 650i
Join Date: Jul 2015
Location: Los Angeles, CA

iTrader: (0)

im running 21x10.5 et34 295/25/21 lowered, it sits perfect.
Appreciate 0
      03-28-2017, 06:41 PM   #7
MSUGOGRN
Second Lieutenant
66
Rep
264
Posts

Drives: 2021 Black X3MC
Join Date: Jan 2017
Location: Denver, CO

iTrader: (1)

Okay fellas. Need your help again based on some comments I had in the lowering thread. Please let me know your thoughts on the following set up.

I have purchased (and they have now been milled) the following wheels:
Front: 20x9 et30
Rear: 20x10.5 et38

I am having the car lowered with Eibach pro kits (0.8" rear / 1.0" front)

I am buying Bridgestone S04 Poles
Suggested tires are 245/35/20 front & 285/30/20 rear

I really don't want rubbing but I also can't stand a stretched look. Will going 255/35/20 front & 295/30/20 rear be good or even better? Just want to make sure rubbing is not a possibility.

Thanks!
Appreciate 0
      03-29-2017, 11:33 AM   #8
ndinh
Lieutenant
United_States
161
Rep
554
Posts

Drives: 640i GC, X5
Join Date: Jul 2015
Location: Los Angeles

iTrader: (2)

Quote:
Originally Posted by MSUGOGRN View Post
Okay fellas. Need your help again based on some comments I had in the lowering thread. Please let me know your thoughts on the following set up.

I have purchased (and they have now been milled) the following wheels:
Front: 20x9 et30
Rear: 20x10.5 et38

I am having the car lowered with Eibach pro kits (0.8" rear / 1.0" front)

I am buying Bridgestone S04 Poles
Suggested tires are 245/35/20 front & 285/30/20 rear

I really don't want rubbing but I also can't stand a stretched look. Will going 255/35/20 front & 295/30/20 rear be good or even better? Just want to make sure rubbing is not a possibility.

Thanks!
Can't really help with the 295 with I've had or have 3 of the 4 sizes mentioned on the same size wheels. The 245 and 255 fronts and 285 rear won't look stretched at all. I guess if money isn't a factor, I'd go for 255/295. I believe upstate650 and another member are running 295's without issues. FYI, I'm running 255/285 currently.
Appreciate 0
      03-29-2017, 01:07 PM   #9
upstate650
Lieutenant Colonel
upstate650's Avatar
United_States
305
Rep
1,719
Posts

Drives: 2014 650xi Gran Coupe Msport
Join Date: May 2013
Location: The Hinterlands of Upstate NY

iTrader: (3)

Garage List
2020 BMW M340xi  [0.00]
Quote:
Originally Posted by ndinh View Post
Can't really help with the 295 with I've had or have 3 of the 4 sizes mentioned on the same size wheels. The 245 and 255 fronts and 285 rear won't look stretched at all. I guess if money isn't a factor, I'd go for 255/295. I believe upstate650 and another member are running 295's without issues. FYI, I'm running 255/285 currently.
I am running 255/295 without issue, but I'm not lowered, so I cant answer his question with certainty. I would take issue with your statement that a 285 tire wouldn't look stretched on a 10.5" wheel. I haven't seen it myself, but 295's on my 10" wheel look perfect I guess it depends on your definition of stretched. Msugogrn is more limited in tire combinations than you, due to xdrive.
__________________
2014 BMW 650xi Gran Coupe Msport Black Sapphire Metallic on full black merino leather. 20" M5 343M wheels for summer, 20" 373 wheels for winter with Nokian Hakkapeliitta 8 studded snow tires. M6 CP exhaust with M6 Diffuser and ///M Performance carbon fiber finisher. Mission Performance stage 1.5 and transmission tune.
Appreciate 0
      03-29-2017, 08:00 PM   #10
MSUGOGRN
Second Lieutenant
66
Rep
264
Posts

Drives: 2021 Black X3MC
Join Date: Jan 2017
Location: Denver, CO

iTrader: (1)

Thanks fellas as always. I made an executive decision and went with the 255 and 295's. I actually searched a lot for that exact same size of wheel with the exact same Bridgestone tire and found multiple forums discussing this set up and concluded the look would be a little bit stretched with the 285 and 245's. Thanks again.
Appreciate 1
      03-30-2017, 08:24 AM   #11
upstate650
Lieutenant Colonel
upstate650's Avatar
United_States
305
Rep
1,719
Posts

Drives: 2014 650xi Gran Coupe Msport
Join Date: May 2013
Location: The Hinterlands of Upstate NY

iTrader: (3)

Garage List
2020 BMW M340xi  [0.00]
Quote:
Originally Posted by MSUGOGRN View Post
Thanks fellas as always. I made an executive decision and went with the 255 and 295's. I actually searched a lot for that exact same size of wheel with the exact same Bridgestone tire and found multiple forums discussing this set up and concluded the look would be a little bit stretched with the 285 and 245's. Thanks again.
you wont be disappointed - post some pics once you get them on!
__________________
2014 BMW 650xi Gran Coupe Msport Black Sapphire Metallic on full black merino leather. 20" M5 343M wheels for summer, 20" 373 wheels for winter with Nokian Hakkapeliitta 8 studded snow tires. M6 CP exhaust with M6 Diffuser and ///M Performance carbon fiber finisher. Mission Performance stage 1.5 and transmission tune.
Appreciate 0
      03-26-2019, 02:05 PM   #12
Sergejevs
New Member
Sergejevs's Avatar
Latvia
0
Rep
9
Posts

Drives: BMW F06, BMW M4
Join Date: Mar 2019
Location: Riga

iTrader: (0)

hello guys, I want to buy new wheels and I doubt about offsets.
Rear 10,5J ET42 does it fit to f06 640d?

Last edited by Sergejevs; 03-26-2019 at 02:18 PM..
Appreciate 0
      03-26-2019, 02:49 PM   #13
Sergejevs
New Member
Sergejevs's Avatar
Latvia
0
Rep
9
Posts

Drives: BMW F06, BMW M4
Join Date: Mar 2019
Location: Riga

iTrader: (0)

Quote:
Originally Posted by ndinh View Post
That offset should be fine. I'm running 20x10.5 ET42 in the rear and after plugging your 20x10 ET34 into willtheyfit, yours will stick out 1.7mm further than mine which will be fine. My rears are perfect, even slightly aggressive when looking at the car from the rear so yours will be a tiny bit more aggressive.
Do you have photo with your 20x10,5 ET42?
Appreciate 0
      03-27-2019, 04:58 PM   #14
ndinh
Lieutenant
United_States
161
Rep
554
Posts

Drives: 640i GC, X5
Join Date: Jul 2015
Location: Los Angeles

iTrader: (2)

Here ya go

Quote:
Originally Posted by Sergejevs View Post
Do you have photo with your 20x10,5 ET42?
Found a picture from a couple years back. 10.5 ET42. Wheels are flush with the fender but the Michelins stick out a few mm.
Attached Images
 
Appreciate 0
      03-28-2019, 12:00 AM   #15
thiscarlife
Private First Class
Australia
26
Rep
127
Posts

Drives: 640i Gran Coupe F06 LCI
Join Date: Dec 2016
Location: Sydney, NSW

iTrader: (0)

I run rear 11 20inch et 42
Appreciate 0
      03-28-2019, 12:04 AM   #16
thiscarlife
Private First Class
Australia
26
Rep
127
Posts

Drives: 640i Gran Coupe F06 LCI
Join Date: Dec 2016
Location: Sydney, NSW

iTrader: (0)

Quote:
Originally Posted by thiscarlife View Post
I run rear 11 20inch et 42
295 rear tyres

Lowered on h&r springs (biggest regret and useless)
Attached Images
  
Appreciate 0
      03-28-2019, 01:40 AM   #17
Karter_Brazy
Eurosteps
United_States
53
Rep
128
Posts

Drives: BMW F06 / MB W212 / BMW F48
Join Date: Oct 2018
Location: Los Angeles

iTrader: (1)

Quote:
Originally Posted by thiscarlife View Post
295 rear tyres

Lowered on h&r springs (biggest regret and useless)
Perfect offset and tire combination in my opinion (of course if car is lowered)
Appreciate 0
      03-28-2019, 03:33 AM   #18
mjd41985
Private First Class
mjd41985's Avatar
52
Rep
105
Posts

Drives: F90 M5c
Join Date: Mar 2019
Location: Boston, MA

iTrader: (4)

Quote:
Originally Posted by thiscarlife View Post
295 rear tyres

Lowered on h&r springs (biggest regret and useless)
Why the regret/useless? I just got my H&Rs in this week. I’d like to know your issues before I pay to have them installed.
Appreciate 0
      03-28-2019, 03:49 AM   #19
Sergejevs
New Member
Sergejevs's Avatar
Latvia
0
Rep
9
Posts

Drives: BMW F06, BMW M4
Join Date: Mar 2019
Location: Riga

iTrader: (0)

Quote:
Originally Posted by ndinh View Post
Found a picture from a couple years back. 10.5 ET42. Wheels are flush with the fender but the Michelins stick out a few mm.
Thank you. What tyre size?
Appreciate 0
      03-28-2019, 03:50 AM   #20
Sergejevs
New Member
Sergejevs's Avatar
Latvia
0
Rep
9
Posts

Drives: BMW F06, BMW M4
Join Date: Mar 2019
Location: Riga

iTrader: (0)

Quote:
Originally Posted by thiscarlife View Post
295 rear tyres

Lowered on h&r springs (biggest regret and useless)
Very nice
Appreciate 0
      03-28-2019, 04:01 AM   #21
Sergejevs
New Member
Sergejevs's Avatar
Latvia
0
Rep
9
Posts

Drives: BMW F06, BMW M4
Join Date: Mar 2019
Location: Riga

iTrader: (0)

640i and 640d is the same by offsets, maybe someone know?
I want to buy ispiri ffr1 wheels 10,5J ET42. Forged, light wheels. I'm affraid that tyre will scrub fender.
Attached Images
 
Appreciate 0
      03-28-2019, 10:58 AM   #22
Karter_Brazy
Eurosteps
United_States
53
Rep
128
Posts

Drives: BMW F06 / MB W212 / BMW F48
Join Date: Oct 2018
Location: Los Angeles

iTrader: (1)

Quote:
Originally Posted by mjd41985 View Post
Why the regret/useless? I just got my H&Rs in this week. I’d like to know your issues before I pay to have them installed.
I think what he means by that is the rear end is not low enough compare to the front, like a rake stance.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:32 PM.




6post.com
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST