Quote:
Originally Posted by TMD29
You can try these:
FEM_BODY 3080 WW_SCHEINWERFERREINIGUNG nicht_aktiv aktiv Completely disables the Headlamp Washers
FEM_BODY 3081 WW_ANZAHL_NACHWISCHZ_FRONT — 3_mal_Nachwischen Windshield wipe cycles after washing
FEM_BODY 3080 WW_ANZAHL_SPRITZIMPULSE_SRA 3_Impulse 2_Impulse Number of headlamp spray pulses
FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation
FEM_BODY 3080 WW_.DAUER_SPRITZIMPULSE_SRA User Value werte=0A (1000ms) Changes how long it washes per pulse (Value in 100ms)
FEM_BODY 3080 WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG User Value werte=82 (130km/h) Max Speed to activate Headlamp Washers
FEM_BODY 3080 WW_PAUSE_SPRITZIMPULSE_SRA User Value werte=0A(1000ms) Change the pause is between wash pulses (Value in 100ms)
FEM_BODY 3080 WW_SRA_SPERRZEIT User Value werte=0A (10min) Change the wait time is before reactivation (Value in 1min)
|
Hi mate,
I changed :
FEM_BODY 3080 WW_ANZAHL_WASCHBET_ZUR_SRA User Value 10_Betaetigungen Number of washes before headlamp wash reactivation
I changed it from 10 to 05, then it seemed to not wash the headlights atall, I have coded it back now fingers crossed it will start working again tomorrow, any ideas whats gone on there? I checked all the washer system settings and that it was set to activ they were all fine and I only amended the above thinking it would wash the headlights every 5 blips of the washers but it was not working atall then.
Fingers crossed it will be back working tomorrow.
Any ideas on this?
thanks