Quote:
Originally Posted by bigbrian
The fitment on my 21" wheels is perfect. I run 265/30/21 on the front and 305/25/21 on the rear. H&Rs will make the tires tuck in the fenders because from what others say it puts the front a tad lower than the KW kit (which I have). I can just barely get my finger in between the fender and the tire so the tuck is perfect. It doesn't rub or anything which is the question I get asked often.
I am not sure if you need to do this with the H&Rs (maybe ask Twitch on here) but to get mine to sit down all the way I had to remove the white bump stop that is on the shock. When I left it in place the shocks were literally sitting on the bump stop, the ride quality was bouncy, and the car didn't lower down all the way. Once I removed the bump stop I was good to go. Also, I don't experience any bottoming out at all.
Post some pics once you get everything mounted up and installed.
Brian
|
Ok, ride is definitely more bouncy now, so I will check on bump stops. Thanks for the wheel info. I will def put some pics up!