2 days ago my instrument cluster blanked while out on a drive.
HUD still works, Fuel Level, Oil Temp, lighting indicators all seem to be working.
Just speedo, tach, trip computer all out.
My initial plan was to check fuses, but I thought I would run the codes through Carly OBDII and see, what came about.
I got: B7F67D COMBI: monitoring circuit reset triggered
E12C20 Kafas interface (detecting traffic signs, 0x287) signal invalid
Then I noticed the cluster was very dimly lit and lighting level fluctuating. So I determined there is power and no need to dig through the fuses.
Today, I go to run the car and the codes again, cluster is BLANK again and I run the diagnostics again and within Instrument Cluster: INFO 930003F Sender node:Error in function addressed
I clear the codes, no change in the cluster, still blank.
Any ideas?