I just did this mod myself the other day. Its somewhat of a pain. But yes the steps listed by Dannym (post #19) are correct. make sure you have a very long screwdriver to reach the side clip (on the side closest to your headlights)
After the screws and clips are removed and you are looking inside the bumper: Start with the top clips, then the sides, and lastly the bottom. Took me about 30 min. If i had to do it again, id say 10-15 minutes now that the fear is gone and I know what to do.
Just yanking on the grilles or using a hose removal tool will not work on our cars unfortunately.
|