Quote:
Originally Posted by jnkirk1974
Bumping this thread. Curious to see if there is a video or pics that show all of the screws to remove, etc.
Thanks!
|
It's already been mentioned earlier in this thread...but the pics below shows what to look for.
When you lift the hood...there's a protective (rubber) cover that is easily pulled up/off to reveal the four push pins & four of the six T30 (torx) scews. To remove the push pins...pull up on the pin and that releases the compression & allows it to come out easily. Then undo the T30 screws and this allows you to pull the front bumper cover forward to access the clips that hold the top & side of the grilles. From there decide the methods mentioned to get the grilles out from the clips on the bottom.