View Single Post
      03-31-2015, 12:52 PM   #6
M6-Coupe
Major General
M6-Coupe's Avatar
1125
Rep
6,072
Posts

Drives: F92 M8
Join Date: Feb 2014
Location: Bay area

iTrader: (0)

Quote:
Originally Posted by Bönz View Post
The front would be okay as the overall diameter difference between 245/35 and 255/35 is negligible at about 7mm. I do not think the additional 5mm width to the inside will rub as others have made this change.

The rear, however, is not good. Going from a 30 to 35 series with a 275 width increases diameter by over an inch (27mm). This will throw off your speed about 4% at 50km/h, but more importantly reduce the amount of torque you put down on the road by the same 4%. If you don't care about these things, I think it will fit, but your performance will suffer.
^^ This
However, the standard rear tire of 640i coupe is 245/45/18 so the total diameter of rear wheel is 26.68" . with new tire (275/35/20) your total diameter would be 27.57" which is 0.9" or 3.3% larger than the standard wheel...
Your front tire is also 1.2% larger than standard which is negligible...
__________________
Current : 2020 F92 Black Sapphire M8 - ZF8
Gone : 2018 F80 Mineral Gray M3 - 6MT
Gone : 2016 F82 Austin Yellow M4 - 6MT
Gone : 2013 F13 Sakhir Orange M6 -7DCT
Gone: 2013 F13 Alpine White 650i -ZF8
Appreciate 0